[ejabberd] startup

Rob Sell lists at facnd.com
Fri Aug 6 17:17:29 MSD 2004


On Fri, 2004-08-06 at 05:34, Badlop wrote:
> Rob Sell escribió:
> > What follows is the latest output containg the error message(s).  It is
> > complaining now that it can't load the ejabberd.cfg it does this as root
> > or a regular user. ejabberd.cfg is in /etc/ejabberd/ directory...
> 
> > =ERROR REPORT==== 5-Aug-2004::13:01:27 ===
> > E(<0.40.0>:ejabberd_config:50): Can't load config file "ejabberd.cfg":
> > enoent
> 
> > =CRASH REPORT==== 5-Aug-2004::13:01:27 ===
> >   crasher:
> >     pid: <0.39.0>
> >     registered_name: []
> >     error_info: "invalid return value from ejabberd_app:start(normal,[])
> > -> {'EXIT',\"no such file or directory\"}"
> 
> The problem is pretty clear: Ejabberd cannot read the config file. If 
> you introduce (on purpose) a syntax error in the file, does it complain 
> about the syntax error or about not finding the file?
> 
> You say that the error appears even when running as root, so it isn't a 
> file permissions problem.
> 
> Maybe Ejabberd does not know where to find the file? Try to pass this 
> argument to erl when running it:
>     -ejabberd config '/etc/ejabberd/ejabberd.cfg'
> 
> If you want to make some debug, the error is printed in 
> ejabberd_config.erl line 50.

Thanks for that, it still doesn't run but now it is complaining about a
syntax error in the config file now. But it doesn't give a line # or
anything. here is the only output i get when running ejabberd now.
Erlang (BEAM) emulator version 5.3.6.3 [source] [hipe]

Eshell V5.3.6.3  (abort with ^G)
(ejabberd at new)1>
=ERROR REPORT==== 6-Aug-2004::08:10:00 ===
application_controller: syntax error before: '/':
/etc/ejabberd/ejabberd.cfg


see below for ejabberd.cfg
-----------------------------------
% $Id: ejabberd.cfg.example,v 1.14 2004/07/11 20:51:50 aleksey Exp $

%override_acls.


% Users that have admin access.  Add line like one of the following
after you
% will be successfully registered on server to get admin access:
%{acl, admin, {user, "aleksey"}}.
%{acl, admin, {user, "ermine"}}.

% Blocked users:
%{acl, blocked, {user, "test"}}.

% Local users:
{acl, local, {user_regexp,""}}.

% Another examples of ACLs:
%{acl, jabberorg, {server, "jabber.org"}}.
%{acl, aleksey, {user, "aleksey", "jabber.ru"}}.
%{acl, test, {user_regexp, "^test"}}.
%{acl, test, {user_glob, "test*"}}.


% Only admins can use configuration interface:
{access, configure, [{allow, admin}]}.

% Every username can be registered via in-band registration:
{access, register, [{allow, all}]}.

% After successful registration user will get message with following
subject
% and body:
%{welcome_message,
% {"Welcome!",
%  "Welcome to the FAC Jabber Service.  "
% Replace them with 'none' if you don't want to send such message:
{welcome_message, none}.

% List of people who will get notifications about registered users
%{registration_watchers, ["admin1 at localhost",
%                         "admin2 at localhost"]}.

% Only admins can send announcement messages:
{access, announce, [{allow, admin}]}.


% Only non-blocked users can use c2s connections:
{access, c2s, [{deny, blocked},
               {allow, all}]}.

% Set shaper with name "normal" to limit traffic speed to 1000B/s
{shaper, normal, {maxrate, 1000}}.

% Set shaper with name "fast" to limit traffic speed to 50000B/s
{shaper, fast, {maxrate, 50000}}.

% For all users except admins used "normal" shaper
{access, c2s_shaper, [{none, admin},
                      {normal, all}]}.

% For all S2S connections used "fast" shaper
{access, s2s_shaper, [{fast, all}]}.

% Admins of this server are also admins of MUC service:
{access, muc_admin, [{allow, admin}]}.

% All users are allowed to use MUC service:
{access, muc, [{allow, all}]}.

% This rule allows access only for local users:
{access, local, [{allow, local}]}.


% Authentification method.  If you want to use internal user base, then
use
% this line:
{auth_method, internal}.

% For LDAP uthentification use these lines instead of above one:
%{auth_method, ldap}.
%{ldap_servers, ["localhost"]}.    % List of LDAP servers
%{ldap_uidattr, "uid"}.            % LDAP attribute that holds user ID
%{ldap_base, "dc=example,dc=com"}. % Base of LDAP directory


% Host name:
{host, "new.facnd.com"}.


% Default language for server messages
{language, "en"}.

% Listened ports:
{listen,
 [{5222, ejabberd_c2s,     [{access, c2s}, {shaper, c2s_shaper}]},
  {5223, ejabberd_c2s,     [{access, c2s}, ssl, {certfile,
"./ssl.pem"}]},
  {5269, ejabberd_s2s_in,  [{shaper, s2s_shaper}]},
  {5280, ejabberd_http,    [http_poll, web_admin]},
 {8888, ejabberd_service, [{access, all},
                    {hosts, ["icq.localhost", "sms.localhost"],
                             [{password, "secret"}]}]}
 ]}.


% If SRV lookup fails, then port 5269 is used to communicate with remote
server
{outgoing_s2s_port, 5269}.


% Used modules:
{modules,
 [
  {mod_register,   [{access, register}]},
  {mod_roster,     []},
  {mod_privacy,    []},
  {mod_configure,  []},
  {mod_configure2, []},
  {mod_disco,      []},
  {mod_stats,      []},
  {mod_vcard,      []},
  {mod_offline,    []},
  {mod_echo,       [{host, "echo.localhost"}]},
  {mod_private,    []},
  {mod_irc,        []},
% Default options for mod_muc:
%   host: "conference." ++ ?MYNAME
%   access: all
%   access_create: all
%   access_admin: none (only room creator has owner privileges)
  {mod_muc,        [{access, muc},
                    {access_create, muc},
                    {access_admin, muc_admin}]},
  {mod_pubsub,     []},
  {mod_time,       []},
  {mod_last,       []},
  {mod_version,    []}
 ]}.




% Local Variables:
% mode: erlang
% End:




More information about the ejabberd mailing list